Home > Products > IP Based PA System > IP Network PA System > IP Network Terminal with Built-in Amplifier
IP Network Terminal with Built-in Amplifier
  • Air ProIP Network Terminal with Built-in Amplifier
  • Air ProIP Network Terminal with Built-in Amplifier
  • Air ProIP Network Terminal with Built-in Amplifier

IP Network Terminal with Built-in Amplifier

IP Network Terminal with Built-in Amplifier
Model:MAG6701

● Dual-network redundancy design, able to work cross network segment
● Able to be installed to any place where there is network.
● Built-in MP3 player, with USB interface and SD interface to play local program
● Independent execution of timing function without host
● Support maximum 48kHz sampling rate, 16 bit digital audio decoding
● Built-in 1×60W high fidelity digital amplifier, low power consumption
● Able to play background music, emergency paging and alarm signal from system host
● One auxiliary audio input interface, one auxiliary audio output interface, two MIC input interfaces, one EMC emergency output interface and one short circuit output
● Controllable volume and playing status of local output
● LED indicator to show signal status, working status and information change
● Support infrared remote control

Send Inquiry    PDF Download

Product Description

    IP Network Terminal with Built-in Amplifier(MAG6701) 100V Network terminal is a network full digital analog-digital signal conversion processor based on TCP/IP communication protocol. Dual-network redundancy design makes it possible to any place where there is network. Remote digital data flow could export audio signal through this device, which is controlled by host. There is built-in MP3 player, USB interface and SD card interface. You could also play local MP3 program when there is no Network audio signal. It could execute timing function without host. There is one audio input interface to connect with other audio equipment (such as DVD). There is one auxiliary audio output interface to connect with other amplifiers to extend power. There is also a MIC interface to realize local paging.

    ● Dual-network redundancy design, able to work cross network segment

     Able to be installed to any place where there is network.

     Built-in MP3 player, with USB interface and SD interface to play local program

     Independent execution of timing function without host

     Support maximum 48kHz sampling rate, 16 bit digital audio decoding

     Built-in 1×60W high fidelity digital amplifier, low power consumption

     Able to play background music, emergency paging and alarm signal from system host

     One auxiliary audio input interface, one auxiliary audio output interface, two MIC input interfaces, one EMC emergency output interface and one short circuit output

     Controllable volume and playing status of local output

     LED indicator to show signal status, working status and information change

     Support infrared remote control

     Could set priority of audio source through Network

    Indicator item

    Indicator

    AUX IN

    Input sensitivity

    300 mV±30mV

    Frequency response

    80Hz-16kHz(±3dB)

    Distortion

    ≦1%

    Noise

    14mV

    Signal-to-noise ratio

    ≥77dB

    AUX OUT

    Input sensitivity

    1000mV±100mV

    Frequency response

    35Hz-20KHz(±3dB)

    Distortion

    0.1%

    Noise

    0.12 mV

    Signal-to-noise ratio

    ≥77 dB

    Maximum output power of the built-in power amplifier

    Single channel mode

    60W/160Ω

    Maximum harmonic distortion of the built-in power amplifier

    ≦1%

    MIC input

    Input sensitivity

    3.5 mV±1mV

    Frequency response

    80Hz-16kHz(±3dB)

    Distortion

    ≦0.5%

    Noise

    14mV

    Signal-to-noise ratio

    ≥77 dB

    USB/SD

    /NET

    PlayMP3

    Input sensitivity

    100V±5V

    Frequency response

    8Hz-16kHz(±3dB)

    Distortion

    ≦0.4%

    Noise

    14 mV

    Signal-to-noise ratio

    ≥77dB

    Capacity of external U disk supported

    32GB

    Voltage range of power supply voltage

    AC220V/50Hz

    Overcurrent, overheat, over-voltage and under-voltage protection

    Support

    Package dimension (L×W×H mm)

    330×270×125

    Machine dimension (L×W×H mm)

    222×195×56

    Net weight

    2.35kg

    Gross weight

    3.2kg

Hot Tags: IP Network Terminal with Built-in Amplifier, OEM, ODM, Customized, Wholesale, Factory, Manufacturers, China, Price list, Urgent, Quotation request, Inquiry, RFQ, Cheap

Related Category

Send Inquiry

Please feel free to give your inquiry in the form below. We will reply you within 24 hours.