Home > Products > IP Based PA System > POE Network Audio System > POE Network Terminal with Built-in Amplifier
POE Network Terminal with Built-in Amplifier
  • Air ProPOE Network Terminal with Built-in Amplifier
  • Air ProPOE Network Terminal with Built-in Amplifier
  • Air ProPOE Network Terminal with Built-in Amplifier

POE Network Terminal with Built-in Amplifier

POE Network Terminal with Built-in Amplifier
Model:POE6401

● It can work across the network segments.
● It can be coupled at any place with access to network.
● It has MP3 player, and is arranged with USB socket and SD socket, which are used to play the local program.
● It can be separated from the host machine to implement the timing point independently.
● It supports maximum 48kHz sampling rate 16bit digital audio bit stream decoding.
● 2×10W or 1×20W high fidelity digital power amplifier is built in with low power consumption settings.
● It can play the background music, emergency paging, and alarm signal and so on from the system host machine.
● It has a way auxiliary audio input interface, a way auxiliary audio output port, a way EMC emergency output port and 1-way short circuit output.

Send Inquiry    PDF Download

Product Description

    POE Network Terminal with Built-in Amplifier(POE6401) network display terminal is a networked all-digital analog-digital conversion signal processor based on TCP/IP transmission protocol, which adopts the dual network redundancy design, and can be coupled at any place with access to network. The remote audio data stream can output the audio signal through the machine with intelligent control of the host machine; MP3 player is built in the machine, and is provided with USB interface and SD card socket. MP3 program can be played when the network audio stream signal is not played; it can be separated from the host machine to implement the timing point independently; a-way auxiliary audio input interface is used to connect other audio source device (such as DVD), and a way auxiliary audio output interface is used to connect other power amplifiers, so as to expand the power; there is a way microphone interface, so as to realize local paging and so on.

    ● It can work across the network segments.

     It can be coupled at any place with access to network.

     It has MP3 player, and is arranged with USB socket and SD socket, which are used to play the local program.

     It can be separated from the host machine to implement the timing point independently.

     It supports maximum 48kHz sampling rate 16bit digital audio bit stream decoding.

     2×10W or 1×20W high fidelity digital power amplifier is built in with low power consumption settings.

     It can play the background music, emergency paging, and alarm signal and so on from the system host machine.

     It has a way auxiliary audio input interface, a way auxiliary audio output port, a way EMC emergency output port and 1-way short circuit output.

     The local output volume and local playing state are controllable.

     Signal state LED indication, working state and information change digital display

     It can be controlled by the infrared remote controller.

     It supports power supply in POE IEEE802.3AT mode.

    Indicator item

    Indicator

    AUX IN

    Input sensitivity

    1000 mV

    Frequency response

    20Hz-20kHz

    Distortion

    0.1%

    Noise

    1mV

    Signal-to-noise ratio

    80 dB

    AUX OUT

    Output sensitivity

    1000mV

    Frequency response

    2Hz-26kHz

    Distortion

    0.05%

    Noise

    0.12 mV

    Signal-to-noise ratio

    77 dB

    Maximum output power of the built-in power amplifier

    Independent channel mode

    10W/4Ω

    Maximum harmonic distortion of the built-in power amplifier

    0.3%

    MIC microphone input

    Input sensitivity

    10 mV

    Frequency response

    20Hz-20kHz

    Distortion

    0.5%

    Noise

    2 mV

    Signal-to-noise ratio

    75 dB

    USB/SD

    /NET

    Play MP3

    Output sensitivity

    7.8V

    Frequency response

    10Hz-20kHz

    Distortion

    0.05%

    Noise

    1 mV

    Signal-to-noise ratio

    80dB

    Capacity of external U disk supported

    32GB

    Range of power supply voltage

    45-256V/50Hz

    OVERCURRENT, overheat, over-voltage and under-voltage protection

    Conforming to

    Package size (L×W×H mm)

    270×210×110

    Machine size (L×W×H mm)

    190×195×50

    Net weight

    1.45kg

Hot Tags: POE Network Terminal with Built-in Amplifier, OEM, ODM, Customized, Wholesale, Factory, Manufacturers, China, Price list, Urgent, Quotation request, Inquiry, RFQ, Cheap

Related Category

Send Inquiry

Please feel free to give your inquiry in the form below. We will reply you within 24 hours.